System components and configuration planning
2.2 SYSTEM SETUP NOTES
Plan the Space, System and Shipping Before Installation.
Use this guide to understand speaker placement, tactile hardware planning and oversize multi-box shipping preparation for the 2.2 Immersive System.
2.2 system setup placeholder
QUOTE PREPARATION
Before You Request a Quote
- Confirm the destination for oversize multi-box shipping.
- Confirm your room, seating or furniture setup.
- Confirm whether you need a complete audio + tactile system.
- Understand that final shipping cost is quoted separately.
- Contact support if system configuration or installation path is unclear.
Quote preparation placeholder
GUIDE SCOPE
What This Guide Covers
Speaker placement and tactile hardware preparation
Oversize shipping, delivery and first-test planning
SETUP PATH
Planning Steps
Confirm System Scope
Make sure you need dedicated speakers and tactile hardware together.
Plan Speaker Placement
Confirm where left and right speakers will sit in the room or seating area.
Plan Tactile Mounting
Identify reinforced seating or platform structures for tactile hardware.
Confirm Configuration
Finalize amplifier, controller and accessory package before purchase.
Prepare for Delivery
Plan carton receiving, storage and room access before shipment.
Run First Test After Arrival
Verify components and begin with low output before normal use.
System Components
The 2.2 Immersive System is planned as a complete audio and tactile configuration, not a single small hardware component.
Dedicated Left Speaker
For the left audio channel in the final system configuration.
Dedicated Right Speaker
For the right audio channel in the final system configuration.
Tactile Hardware Configuration
For physical feedback integrated into seating or platform structures.
Amplifier / Controller Configuration
Confirmed before purchase based on the final system path.
Cable and Accessory Package
Confirmed by quote and product configuration.
Final package contents are confirmed before purchase.
System components placeholder
Speaker Placement
Speaker placement depends on room layout, seating position and available cable routing.
- Plan left and right speaker positions before purchase.
- Leave space for stable placement and cable routing.
- Avoid blocking speaker output with furniture or enclosed spaces.
- Do not assume exact acoustic performance without room testing.
Speaker placement placeholder
Tactile Hardware Planning
The tactile hardware should transfer physical response into a reinforced seating or platform structure.
- Identify rigid mounting points before final configuration.
- Avoid loose upholstery-only mounting.
- Confirm access for installation and future service.
- Plan cable paths before furniture is closed or moved into place.
- Contact support if mounting feasibility is unclear.
Tactile hardware planning placeholder
Amplifier / Controller Configuration
The amplifier and controller path should be confirmed before purchase as part of the final 2.2 system configuration.
- Confirm the final system configuration before payment.
- Do not assume the 2.2 system uses the same setup path as the Starter Kit.
- Confirm input source and control path before installation.
- Support can help confirm the correct system plan.
Amplifier controller configuration placeholder
Space and Furniture Preparation
Plan the room and furniture path before shipment so installation can proceed without unnecessary rework.
- Confirm seating or platform access.
- Confirm furniture can be moved or opened for installation.
- Keep cable routing paths accessible.
- Leave enough room for speaker placement.
- Confirm whether local installation help is needed.
Space preparation placeholder
Shipping and Delivery Preparation
The 2.2 Immersive System may ship in multiple cartons, and final shipping cost depends on destination and available delivery services.
- Oversize multi-box shipping applies.
- Final shipping cost is quoted separately.
- Large speaker units may increase logistics cost.
- Confirm delivery address and receiving conditions before shipment.
- Inspect cartons on arrival before installation.
Shipping preparation placeholder
First Test After Arrival
After receiving the system, verify all components and begin testing gradually.
- Confirm all cartons and components are present.
- Inspect for shipping damage before setup.
- Connect gradually according to final system guidance.
- Start with low volume and low tactile intensity.
- Stop testing and contact support if anything looks abnormal.
First test after arrival placeholder
When to Choose Starter Kit Instead
The Dual Tactile Starter Kit may be a better path if you only need tactile feedback or want a simpler standard-shipping setup.
Choose Starter Kit If:
- You only need tactile feedback.
- You do not need left / right speakers.
- You want a smaller standard kit.
- You want amplifier + two Core Shakers in one package.
Choose 2.2 System If:
- You want dedicated left and right speakers.
- You want audio and tactile feedback together.
- You are planning a larger room or seating system.
- You are prepared for quote-based oversize shipping.
COMMON MISTAKES
Common Mistakes
- Assuming it ships like a small parcel.
- Skipping shipping quote confirmation.
- Treating it as the same product as the Starter Kit.
- Planning speaker placement too late.
- Ignoring furniture access or cable routing.
- Assuming every room or furniture layout is suitable.
- Expecting a fixed shipping price before destination confirmation.
FAQ
Setup Questions
Is this the same as the Starter Kit?
No. The Starter Kit is tactile-only. The 2.2 system includes dedicated left and right speakers plus tactile system configuration.
Why is shipping quoted separately?
The system may ship in multiple cartons and shipping depends on destination and available delivery services.
Can I buy this without speakers?
If you do not need speakers, choose the Starter Kit or Core Shaker products instead.
Is this a standard checkout product?
No. It requires shipping quote and configuration confirmation before final purchase.
Can I install it in any sofa?
Not always. Mounting depends on the internal furniture structure and access for installation.
What should I prepare before requesting a quote?
Prepare destination, room layout, seating or furniture details, and whether you need complete audio + tactile feedback.
Ready to Configure a 2.2 System?
Confirm your destination, room setup and system requirements before finalizing a complete audio and tactile configuration.